You are here:

Tamiya 58738 XM-01 Pro Chassis

Tamiya 58738 XM-01 Pro Chassis

Our Price:

£279.00


Saving (£35.99)

1 in stock

Description

Tamiya 58738 XM-01 Pro Chassis

This shaft-driven 4WD chassis kit (M-chassis size) is another addition to the R/C rally line-up, and has features such as three types of wheelbase, new suspension components and a polycarbonate chassis cover. Add this chassis kit to your M-rally collection!

  • This is a 1/10 scale R/C chassis assembly kit.
  • Equipped with front mid-ship, longitudinal motor position.
  • Changing rear section allows a choice from three wheelbases (short: 210mm, middle:225mm, long: 239mm). (ref. Image 3)
  • Bathtub frame chassis and polycarbonate chassis cover plus front inside polycarbonate cover and rear section are newly-folded parts. Mud guards helps prevent dirt and dust from getting inside.
  • New front C-hubs and rear uprights, plus lower suspension arms allow two types (about 8mm or 13mm) of ground clearances.
  • Caster angle can be set at 5 degrees by suspension mounts. *For comparison, the XV-02 PRO chassis kit uses caster blocks which feature 6-degree caster angle. (XV-01 chassis: 10-degree caster angle)
  • The drivetrain employs oil-filled gear differential for front and rear
  • Comes with two 39T differential gears and one 40T differential gear for adjustment of front and rear drive balance.
  • Use 39T gear (w/15T gear) on the front and 40T gear (w/15T gear) on the rear for drive balance bias to front and vice versa for drive balance bias to rear.
  • It features a longitudinal upright battery pack position in the centre-left for optimum balance.
  • Front bumper with skid angle contributes to reduce surface contact. • Aluminium dampers are employed at the front and rear.
  • M-Chassis 11-spoke racing wheels (Item 51394) are paired with 60D rally block tires (Item 51427).
  • Front and rear universal drive shafts come as standard.
  • Compatible with centre diff setup and separately sold slipper clutch.
  • Low-profile servo is recommended. (Standard servo can be used, but it comes into contact with the front inside polycarbonate cover
  •  Please note that this chassis requires separately sold body, battery pack, motor, ESC and R/C equipment

Specifications
●Length: 308mm (with 225mm wheelbase) ●Width: 165mm ●Choice of 210mm, 225mm and 239mm wheelbases ●Bathtub frame ●Front midship motor, shaft-driven 4WD ●Front/rear oil filled gear differentials ●3-piece steering tie-rod ●4-wheel independent double wishbone suspension ●Aluminum cylinder oil dampers ●Gear ratio = 8.27:1 (with kit 22T pinion; 13 ratios between 10.71 and 6.28:1 are possible with separately sold pinions) ●Contact your local Tamiya Agent regarding the ESC

Separately Required Items
●M-Chassis compatible body ●Type 540 motor ●Tires ●2-channel R/C system ●Battery pack & charger

  • The motor is mounted midships and power goes via propeller shafts to front and rear.
  • Heavier equipment is placed in the middle of the chassis, and the battery has an upright position, giving this rally chassis a compact setup.
  • 39T oil filled gear differentials are standard front and rear, and a 40T gear is also included. Use the 40T to adjust the drive balance.
  • S and M/L wheelbase propeller shafts are included. The same rear input shaft is used for all wheelbases.
  • Change the rear construction to switch between the three wheelbases.
  • The three wheelbases are compatible with existing M-chassis bodies.
  • New hub carriers and rear uprights let you choose ground clearance.
  • The polycarbonate chassis cover also features wheel well covers.

Additional information

Brand

Tamiya

Brand

Tamiya

Related Products