Sanwa SA101A33171A Radio Sanwa Exzes Z3 FH5 RX493i Receiver with TX Battery instal

Description

Sanwa SA101A33171A Radio Sanwa Exzes Z3 FH5 RX493i Receiver with TX Battery instal

Sanwa Exzes ZIII – A Revolution by Sanwa

Sanwa, the legendary manufacturer and multiple-time world champion, once again pushes the boundaries with its new high-end radio: the Sanwa Exzes ZIII. Equipped with the revolutionary FH5U protocol, this radio processes twice as much information as its predecessor, the FH5, delivering unprecedented performance and precision in the world of RC.

With cutting-edge technology, the Sanwa Exzes ZIII establishes itself as the fastest radio in the world. This claim is validated by the world’s top drivers, who trust it to dominate the podiums.

Sanwa Exzes ZIII: Designed for champions, embraced by legends.

The long-awaited SANWA EXZES ZIII high-end stick radio is here!

• Indicator function added
• Direct model selection function specification change
• Quick setup wizard menu position change
• Menu color change function added (95 colors)
• Dedicated to FH5/FH5U system
• LP1-2500 LiPo battery TYPE-C included
• The sensor installed inside EXZES ZⅢ enables motion steering (steering operation) by tilting the transmitter

•  Uses a TFT color LCD (480 x 320) with excellent visibility
•  Equipped with a touchpad for intuitive operation
•  Equipped with a charging port on the transmitter body.  The charging status can be checked by the charging circuit LED built into the Li-Po battery (LP1-2500).  Charging cable is not included. Please prepare a commercially available micro USB cable (Type-C) separately.
• *LP1-2500 does not support USB PD (USB POWER DELIVERY), so it cannot be charged with a USB PD device.
• Supports micro SDHC cards, allowing firmware updates, model data, and telemetry log data management . * Please use Sanwa genuine micro SD cards or micro SD cards with an appropriate format (FAT32) for compatible micro SD cards. Sanwa genuine micro SDHC card 8GB is recommended.
• The multi-setting gear function allows you to connect a servo to the EXZES ZⅢ and set the PGS servo.
• SSL CODE10 support allows you to change settings for PGS servos, SUPER VORTEX Gen2 PRO, etc. in real time from the transmitter.
• The quick setup wizard makes it easy to set up model data and various settings.

Other special functions

●Full dot color LCD (480 x 320) ●Touchpad ●Built-in antenna ●Feeling ●ST, TH tension adjust ●Safety link ●Racing mode ●Setup wizard ●Dual rate ●End point adjust ●Anti-lock brakes ●Servo speed ●Offset ●Trim/sub trim ●Servo reverse ●Curve ●Failsafe ●Timer ●Lap ●CODE AUX ●Model memory ●Model name ●Model (select/copy/clear/sort) ●Direct model select ●RF MODE setting (FH5U, FH5) ●Response mode setting (SXR/SUR/SSR/SHR/NOR) ●Bind ●Log (REC/RPM/VOLT/TLM1/TLM2/ST point/TH point/RX mode/Read-out function) ●Servo monitor ●Key assignment ●Vibrator ●AUX type ●Trim type ●Throttle type ●Calibration ●Custom menu ●Mechanical steering angle adjustment ●Indicator ●Motion steering, etc…. ●Compatible receivers: RX-493i, RX-492i, RX-49T, RX-493, RX-492, RX-491

For a higher capacity optional battery try the IP584674-1S2P – Intellect TX LiPo Sanwa M17 / ZIII 6000mAh 3.7V