You are here:

Intellect IPSL2S5800PT1 Lipo LiHV 2S Slim Stick 5800mAh 7.6v

Intellect IPSL2S5800PT1 Lipo LiHV 2S Slim Stick 5800mAh 7.6v Shipping restrictions.

Our Price:

£59.99

2 in stock

Description

New for 2021 is this Intellect Platinum series LiPo. Recognisable by the labelling with metallic blue lettering.

New slim super narrow style.

Huge range of batteries for all applications and required weights for perfect chassis balance and centre of gravity.

All the batteries have a burst current of 120C and have LIHV technology.

As always with intellect LiPo’s they are excellent value for money.

Includes balance charge leads and connectors.

Read all instruction before use.

Dimensions – Height & Length & Weight

25.1mm x 139mm x 37mm

5mm connector

235g

Not currently BRCA/EFRA Legal

Important Safety Instructions and legal notice (By IntellectAmerica)


LEGAL NOTICE

Since we have no control over the correct use, installation, application, or maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product. Any claims arising from the operating, failure or malfunctioning will be denied. We assume no liability for personal injury, property damage or consequential damages resulting from our product or our workmanship. As far as is legally permitted, the obligation to compensation is limited to the invoice amount of the affected product.

LITHIUM POLYMER SAFETY INFORMATION

1) DO NOT leave the battery in your model when charging
2) DO NOT leave unattended when charging
3) ALWAYS balance charge the battery
4) ALWAYS use a LiPo charging bag
5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
6) YOU MUST not over discharge the Li-Poly battery pack
7) READ & UNDERSTAND the instructions carefully before operating this battery

NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can’t exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage.

Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.

Relating to the use of Li-Polymer batteries:

Please read the following content before using or charging your batteries.

  • Lithium-ion Polymer (LiPo) batteries are volatile, End-users should take all measures against a risk of fire, personal injury and damage to property.
  • In case of mishandling or defective, LiPo batteries may lead to explosions, fire, smoke venting and/or a risk of poisoning.
  • End-users must be professionals, and have adequate knowledge and know-how of the battery maintenance and its usage.
  • By purchasing LiPo battery, the end-user assumes all risks associated with this battery type, If you do not agree with these conditions, please consider NiMH or NiCd battery, or return the LiPo battery immediately point of purchase, before use,
  • At all time, LiPo batteries should be kept away from children.
  • Do Not store LiPo batteries in extreme environment
  • Do Not short-circuit the battery
  • Do Not dispose of battery in fire or water Remove LiPo batteries from devices when not in use Charge LiPo batteries only with approved balancing charger.
  • It is the sole responsibility of end-users in assuring their chargers function properly.
  • Do Not charge battery with polarity reversed Do Not leave battery unattended during charging
  • By applying LiPo batteries to RC-modeling usage, end-users have to note that battery capacity would decrease gradually.
  • Do Not dismantle and reassemble the battery packs by your own.
  • The electrical details of individual cells may result in poor matching thereafter
  • Stop using a battery in case of heating, deformation, leakage, gas venting, smoking or other abnormality.
  • If leaked liquid gets in eyes, wash them with clean water and consult a doctor immediately
DISPOSAL PROCEDURE
  1. If any Li-Poly cell in the battery pack has been physically damaged, resulting in a swollen cell or a split or tear in a cell’s foil covering, do NOT discharge the battery.
  2. Place the Li-Poly battery in a reproof container or bucket of sand.
  3. Now the battery must be discharged. Discharging a Li-Poly battery – especially those with a large capacity – can take hours, days and even weeks to complete. For the fastest results, make sure each cell in your battery has a voltage no higher than 3.0V before continuing to Step 4.
  4. Choose a method below to achieve this:
    • Option 1: Connect the battery to a Li-Poly specific charger and set the charger to “Discharge” mode. Set the discharge cutoff voltage to the lowest possible value and discharge the battery until it has finished its discharge cycle.
    • Option 2: Use the battery in your model until the ESC low voltage cutoff initiates. Typically, the low voltage cutoff will be programmed to initiate when the individual cells reach 3.0 – 3.2V.
  • Deep Discharge – Connect a 150 ohm resistor with a power rating of 2 watts, commonly found at most electronic stores, to the packs positive and negative terminals to safely deep discharge the battery. This procedure is safe with 1S – 6S batteries; keep in mind the larger the battery capacity, the more time the discharge requires. It is important to be patient as this step can take many days to complete. For example, a 3S 2200mAh battery at 50% charge will take over 80 hours to discharge to 0V.
  • If possible use a volt meter and check the voltage of the battery. Ensure each cell is at 1.0V or lower.
  • Submerge the battery into a bucket or tub of salt water. This container should have a lid, but it does not need to be air-tight. Prepare a plastic container (do not use metal) of cold water, and mix in 1?2 cup of salt per gallon of water. Drop the battery into the salt water. Allow the battery to remain in the tub of salt water for at least 2 weeks. This salt bath will neutralize any remaining power in the battery.
  • Remove the Li-Poly battery from the salt water, wrap it in newspaper or paper towels and place it in the normal trash. Lithium Polymer batteries are land ll safe once drained of all power.

Additional information

Weight 99999 g
Brand

Intellect

Cell

2S

Format

Stick

Connection Type

5mm Plug

Brand

Intellect