Hornby R1019 Flying Scotsman Train Set Locomotive DCC Fitted. Used Box tatty.

Description

Hornby R1019 Flying Scotsman Train Set Locomotive DCC Fitted – Some track pieces missing (Original set from the early 2000s)

The box is very tatty. See Photos

The train is an excellent runner

Includes 240v ac power supply, controller, some track pieces (4 r2 standard length cures, one right angle and one left angle point, two-track stops, track mat, Royal Scotsman locomotive and tender (DCC Fitted), three LNER coaches. Some pinholes in the track mat where it was pinned down, See the last picture.

In used condition, runs well when tested on DCC. Note: To use the train with the included controller the DCC installation decoder should be set to run in analogue mode or the DCC should be removed and wired for analogue operation.

Required to complete:

12 half-length straights

2 half-length r2 curves

4 standard length straights

History of the Flying Scotsman Model:

Class A1 Locomotive – Flying Scotsman 4472

Years Released: 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2004 2005 2006 2007 2008 2009 2010 2011 (Model Year pages)
Model released for 31 years. (Model may have been released after 2011)